Safety Cautions of Fixed Belt Conveyor
In the process of daily use,many users may use the wrong way to operate the belt conveyor.It will not only result in conveyor damage,
but also harm to the operating personnel. Please pay attention to the following safety operating methods in order to utilize the fixed belt conveyor better.
Before the fixed belt conveyor put into use,uses should attention the following aspects.
1.Install the fixed belt conveyor according to the prescribed installation methods
2.Check the running part of the belt buckles and bearing device is normal, whether the protective equipment is complete
3.The temperature of the working environment and delivery of materials shall not exceed 50 ℃ and lower than -10 ℃
 |
| Fixed Belt Conveyor |
4.No pedestrians or take stand by the conveyor belt
5.Ensure the conveyor motor insulation is good
During the operation of belt conveyor,users can not ignore the following aspects.
1.No-load start the belt conveyor. Functioning rear can into the material.
2.When the conveyor is running the series, we should begin the discharge end, a sequence start.
3.Be sure to stop into the material and then stop
4.Forbidden to pull the belt by hands,in order to avoid the accident
 |
| Sew Belt Conveyor Motor |
No comments:
Post a Comment