The Selection of Corrugated Sidewall Conveyor Belt

Corrugated sidewall belt is used for pulling and carrying purposes for corrugated sidewall conveyor. It consists of a baseband, corrugated sidewall and baffle. The corrugated sidewall connects with both sides of baseband while the baffle connects with both side of corrugated wall accordingly to a certain space.
1. Baseband 
The baseband appearance of corrugated sidewall belt is the same with ordinary belt ,but its lateral stiffness is greater than ordinary belt. Usually corrugated sidewall belt adopts special belt as its baseband, the tensile materials (core layer) can be divided into four kinds: cotton canvas, nylon canvas, polyester canvas and steel wire.
2. Corrugated sidewall
This series of products using S-type of corrugated sidewall.
3. Baffle
a) This series of product is recommended to use type T, type TS (B), type TC, type TCS (B) and type C baffles.
b) Type T and type TS (B) baffles are only suitable for conveyor angle β≤40 ° while type TC and type TCS (B) and type C of baffles are suitable for conveyors with any transmission angle.
c) Type C baffle is suitable for conveying viscous materials. On the other hand, if the conveying angle and material density are greater, then type TCS (b) baffle should be used.
d) The spacing between baffles is integral multiple of waveform of the corrugated sidewall. The spacing between baffles (TS) and height (H) are related to conveying angle β.  

Please Focus on Belt Speed Selection and Principle of Belt Conveyor

As we all know, the most decisive factor of belt conveyor throughput is the belt speed, here we would like to introduce the selection method of belt conveyor belt speed: 

(1) If the conveying capacity of belt conveyor is large, belt width is wide, please select a high belt speed.
(2) If the material is easy to move with big granularity and strong grinding property, please select a low belt speed.
(3) If material conveying interval is long, please choose a high belt speed; If material conveying interval is short and the conveyor angle is big, please select a low belt speed.
(4) If there is large amount of dust during conveying, the belt speed would be 0.8 m/s ~ 1 m/s.
(5) If belt conveyor works with a discharging tripper, the belt speed should not be higher than 2.5 m/s.
(6) If belt conveyor conveys finished product items, the belt speed should be less than 1.25 m/s.

Belt speed selection principle of belt conveyor : the belt speed of belt conveyor is related to belt width, throughput, material size, material properties and conveyor angle. When belt conveyor transports upward and dip angle is large, the tape speed should be low; When belt conveyor transports downward, the belt speed should be much lower. Belt speed selection also should match the cooperated material discharging equipment type, when adopts plough type discharging machine, the belt speed should not exceed 3.15 m/s.