Why will Belt Conveyor Motorized Pulley Get Rusty

During the operation process of belt conveyor, it will occur some problems due to incorrect method of using or wear and tear, therefore, we need to know some knowledge in order to ensure the normal operation. Here PK Machinery will list some reasons why motorized pulley of belt conveyor will rust:
1. Electroplating time is not enough, it dues to the problem of process flow;
2. Air liquidity of the location where motorized pulley stores is not good, or the location is wet, it is may due to the large difference in temperature;
3. If the package sealing breaks, the motorized pulley may oxidate and get rusty;
4. The most important point is that before electroplating, the dirt on motorized pulley surface is not being cleaned well, it is also one of the reasons why the motorized pulley will get rusty.

 

 

Please Focus on Belt Speed Selection and Principle of Belt Conveyor

As we all know, the most decisive factor of belt conveyor throughput is the belt speed, here we would like to introduce the selection method of belt conveyor belt speed: 

(1) If the conveying capacity of belt conveyor is large, belt width is wide, please select a high belt speed.
(2) If the material is easy to move with big granularity and strong grinding property, please select a low belt speed.
(3) If material conveying interval is long, please choose a high belt speed; If material conveying interval is short and the conveyor angle is big, please select a low belt speed.
(4) If there is large amount of dust during conveying, the belt speed would be 0.8 m/s ~ 1 m/s.
(5) If belt conveyor works with a discharging tripper, the belt speed should not be higher than 2.5 m/s.
(6) If belt conveyor conveys finished product items, the belt speed should be less than 1.25 m/s.

Belt speed selection principle of belt conveyor : the belt speed of belt conveyor is related to belt width, throughput, material size, material properties and conveyor angle. When belt conveyor transports upward and dip angle is large, the tape speed should be low; When belt conveyor transports downward, the belt speed should be much lower. Belt speed selection also should match the cooperated material discharging equipment type, when adopts plough type discharging machine, the belt speed should not exceed 3.15 m/s.

Installation and Notes of Belt Conveyor Anti-rain Cover

1) Open cover and fixed cover are manufactured with the galvanized steel plate or the colorized coating steel plate. Generally ,there will be 1 piece of open cover and 7 pieces of fixed covers installed every 8 pieces covers, the 2 kinds covers also can be installed side by side alternately ( it also can be matched according to customer’s requirement). At first, fasten the fixed conveyor with drilling rivets and based on the line which is upward 30mm from the top of Z type steel, fix a mounting hole every 450mm, every piece of cover overlaps 2 wave crests. Open cover overlaps above the fixed covers in order to open conveniently.

2) The Z type steel or the connection angle iron which is the main support frame of the conveyor cover, the length is equal to the length of the installed conveyor cover
The Z type steel or the connection angle iron is welded on the channel steel or the little stiffening angle iron on both sides of the conveyor

3) Install the covers (fixed covers) from one side to another side along the conveyor, during installation, people are not allowed to stand on the covers and no hard beating and hitting is allowed.
4) Mount the fixed covers on the Z type steel with the drilling rivet. The mounting points are not less than 4 on every piece.

5) 1 piece of observation window cover could be installed every 10 pieces for convenient checking and inspecting. It is decided by users.

6) Salient point cover is only used for the salient points of the convex-concave of the conveyor. Deviation switch cover is only used for covering the deviation switch. These 2 kinds covers also can overlap the fixed covers.

4. Note

1) During the installation, please handle the anti-rain cover carefully and avoid scratching.

2) After installing the accessories, please clean the surface and paint the scratched points again.

Installation of Open Belt Conveyor Cover

View 1: Installation drawing of whole open –close type 

 

View 2: Installation drawing of half open –close type (double chip open- close type) 

 

1) installation of handle 
After overlapping the open cover and fixed cover, based on the center line of the cover, the location upward 250mm is the center line used for installing the handle (it can be adjustable according to height of the conveyor support frame). Put the handle straightly and drilling a 4－Φ5 hole, then fasten with the rivets.

2) installation of hinge 
Adjust one side of the cover up higher from the top of the Z type steel (angle iron) 5mm, inward 140mm from the front and back sides of the cover, and upward 27mm is the location of the hinge, then drill holes Φ5 and fasten with the rivet. Others holes are also fastened with the rivets. 

3) installation of the lock catch
After installing the hinge, on the other side of the cover, inward 185mm from front and back sides of the cover, then based on the bottom, upward 36mm and 77mm , drill holes Φ5 and fasten the lock with the rivet, next keeping the lock locking( clamp status), and then putting the lock nose on the Z type steel straightly and drilling hole to fasten.

4) installation of the open cover
Overlap the open cover on the bilateral fixed covers. The overlapped length should be the length of 2 pitches of waves, then put the other side of the hinge appressed on the angle iron and drill hole 4－Φ5 with the rivet fastened.

Installation of Belt Conveyor Cover Support Frame

 Belt conveyor cover is applicable to power plant, cement plant, mines and other major factories which is waterproof, dustproof and windproof, it plays a great role in reducing the loss during the process of conveying goods ,making the conveyor belt more safe and reliable in operation and purifying the environment .

As the main support frame of the conveyor cover, the length of Z type steel or the connection angle iron is equal to the length of the installed conveyor cover. Please weld the Z type steel or the connection angle iron on the channel steel or the little stiffening angle iron on both sides of the belt conveyor. If need the stiffening angle iron, at first, weld the stiffening angle iron on both sides of the conveyor, then weld the Z type steel or the connection angle iron on the stiffening angle iron, detailed steps are as following:
 1) first weld the little stiffening angle iron ∟40*40*100*4(just for reference, it also can be indicated by users) every 1.5m or 2 m on both sides of the belt conveyor ( eudipleural ). The height from the intermediate frame to the top of little stiffening angle iron should ≥50mm ( it also can be decided by users).
2) Then weld the Z type steel 30*50*30*(2.0~3.0),( just for reference, it also can be replace by angle iron) and fix it on both sides of the intermediate frame top, the inner size should be 10-20mm bigger than outside size of intermediate frame.
3) After being welded please remove welding slag then paint.
 

How to Solve Portable Belt Conveyor Belt Skid Problem

Portable belt conveyor is a lightweight continuous conveying equipment with the features of high efficiency, good mobility, and convenient usage. It not only conveys bulking material but also realize conveying bagged material, the angle and lifting height is adjustable. In our daily life of operation, we may have trouble of belt skid problem, today PK Machinery will introduce the method to solve the problem:

1.You can adjust the stroke of tension to increase the tension to solve belt skid problem for the portable conveyor which adopts screw or hydraulic tensioning . However ,if the stroke of tension is not enough, it may lead to permanent belt deformation ,and you need to cut a piece of belt off and vulcanize again. 

2.If you require long stroke of tension when using nylon or EP belt, you can also vulcanize the belt or increase the stroke of tension to solve belt skip problem.  

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

Portable Belt Conveyors will be Delivered to Romania

On August 4th, 2015, sand blasting mining machines including one circular vibrating screen, one hopper, onevibrating feeder and three portable belt conveyors used to deal with iron ore were delivered to Qingdao port. And these machines will be delivered to Romania from Qingdao port on August 7th. 

 According to our customer’s requirement, we designed and manufactured YK1230 circular vibrating screen with more than 200 t/h handling capacity, it can be used for ore dressing, power, chemical industry,construction material.


 As a part of circular vibrating screen, hopper is used to discharge materials.

 With a length of 1000mm, width of 1500mm, vibrating feeder can feed material for belt conveyor, vibrating screen, crusher etc.


With belt width of 800mm, 650mm, 650mm respectively, DY portable belt conveyors can only convey bulk material, but also packed products.


 We are the specilized manufaturer of vibrating screen, belt conveyor, bucket elevator, screw conveyor, scraper conveyor for many years. And we devote to design satisfactory products, anticipate to cooperate with you. 

Mobile/Movable/Portable belt conveyor is continuous material handling equipment for loading and unloading material such as bulk material, lump material, and package goods in different place and different height.
Mobile/Movable/Portable belt conveyor consists of frame, conveyor belt, belt rollers, tensioning device, transmission device, height-adjusting device, wheels, etc.
Mobile/Movable/Portable belt conveyor is widely used at ports, terminals, stations, coal yard, warehouses, farms, etc.

 If you want to know more information about the portable belt conveyor,welcome to  click the following link:http://www.pkmachinery.com/video/